Traxxas EZ-Peak DUAL LiPo Charger & 2x 7600mAh 2S Batts SPARTAN BRUSHLESS COMBO

Charger Features and Information
The Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard LiPo or NiMH with Traxxas high-current connectors. Charge two batteries at once at up to 4-amps each, or switch to high-output mode to charge large batteries at up to 8 amps!

Charging Solved!
Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage.

Most Powerful Traxxas Charger
Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.

iD Simplicity
With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience.

Features

• 100-Watt output
• Recognizes Traxxas iD batteries to automatically program and optimize charger settings
• Charge a NiMH and LiPo at the same time
• Charge progress indicator
• Optimized for faster LiPo balance charging
• One button LiPo storage charge protects your battery investment
• Advanced high-resolution peak detection delivers a perfect charge
• Easy to use interface
• Audible alerts
• Built-in cooling fan
• Advanced Mode for full manual control of charger settings
• Legacy support for all Traxxas High-Current Connectors
• Built-in balance ports for conventional LiPo batteries
• Charges 5-8-cell NiMH batteries
• Charges 2S and 3S LiPo batteries

Specifications
AC Input: ­ 100-240 Volts
Charge Current Range: ­ 1.0-4.0A (Dual mode) or 5.0-8.0A (High-Output Mode), 100W max
Discharge Current Range: ­ 500mAh
Current Drain For Balance Ports: ­ 500mAh
NiMH Battery Cell Count: ­ 5-8 Cells
LiPo Cell Count: ­ 2-3 Cells
Net Weight: ­ 575g
Dimensions: ­ 176 x 138 x 57mm

Note: Vehicles must be run with the low-voltage detection enabled on the ESC to prevent damaging the batteries